Jewelry Lessons on Wire Wrapping Technique : Make Wire Wrapped Pendant


Payment Options : PAYPAL, All Credit Cards & Debit Cards

This Tutorial is available for DIGITAL DOWNLOAD only in PDF format.


Wire Wrap Tutorial, Wire Weaving Tutorial, Wire Wrapping Tutorials, Wire Jewelry Tutorial, Wire Pendant Tutorial, Wire Work Tutorial, PDF

Created this Heady Wire Wrap Pendant Tutorial for all of you!! its intricate and beautiful. You can easily modify the stones and wire gauges as per your choice, just follow the overall structure of the pendant. Enjoy creating with this tutorial..

This is an intermediate level tutorial. You should have basic knowledge of Wire weaving and should be able to hand form curves!! The size of final pendant created in this tutorial is
3 ¼” Height x 1” Width.

Bellow is all the materials and tools required..

Materials :

Cabochon stone with flat back:
Round in shape, Size : 8mm Diameter
Oval in shape, Size : 19mm Height x 14mm Width

Variation 1: You can definitely replace the Oval stone with Round Stone. And you can altogether not use the small round stone.

1. 14” or 35.5cm of 18ga (gauge) solid Half Hard Square copper wire – 1 pieces
2. 24” or 60cm of 20ga (gauge) solid round dead soft copper wire, cut in following pieces:
– 2” or 5cm – 2 piece
– 10” or 20cm – 2 piece
3. 79” or 200cm of 22ga (gauge) solid round dead soft copper wire, cut in following pieces:
– 10” or 20cm – 4 piece
– 15” or 38cm – 1 piece
– 6” or 15cm – 2 piece
– 12” or 30cm – 1 piece
4. 42” or 106cm of 26ga (gauge) solid round dead soft copper wire, cut in following pieces:
– 24” or 60cm – 1 piece
– 18” or 45cm – 1 piece
5. 378” or 960cm 30ga (gauge) solid round dead soft copper wire, cut in following pieces:
– 36” or 91cm – 1 pieces
– 72” or 182cm – 2 pieces
– 108” or 274cm – 1 piece
– 90” or 228cm – 1 piece

Copper beads:

2mm bead : 3 beads
2.5mm bead : 4 beads
3mm bead : 2 bead

Tools :
1. Flat nose pliers
2. Flush cutters for cutting the wire
3. File (to smooth out all cut ends of wire)
4. 5mm round Dowel (or any round pencil or pen of that diameter. You can use the bail making pliers if you have them)
5. 25mm Dowel (Round Bottle/rolling pin)
6. Jewelry Polishing pad or Nylon jaw pliers to straighten the wires
7. Marker pen
8. Ruler to measure

For final finishing:

You can leave the copper pendant as it is looking shiny or with natural tarnish. But I prefer to polish my pieces to high gloss, to do that you will need following
1. Liver of sulfur or any copper antiquing solution
2. Steel wool
3. Dremel with Cotton buff wheel
4. Polishing compound of your choice

Please keep in mind that this listing is only for PDF tutorial. You will not be receiving any kit or any physical item with this order.

Do not lend, share or distribute this tutorial.
Do not mass produce. If you decide to sell designs created using this tutorial then please give credit to the author and share the link for this tutorial
Contact me with any question you may have while creating..

Your LIKES, SHARES and REVIEWS are very much appreciated!!
Please share photos of your creations via this tutorial..

– I do not return or exchange PDF tutorials.

Let’s stay connected!!

Thanks for visiting..


There are no reviews yet.

Be the first to review “Jewelry Lessons on Wire Wrapping Technique : Make Wire Wrapped Pendant”

Your email address will not be published.