Materials for Aurora Pendant

Download PDF File

The final size of the pendant created using these materials is   1″ (Width) x 1 ¾” (Height) /

2.5 cm (Width) x 4.5 cm (Height)

Wires :

1. 18ga (Gauge) round dead soft wire – 24 inches/61 cm long. Cut into the following pieces :

– 8” or 20 cm – 3 pieces

2. 28ga (Gauge) round dead soft wire – 84 inches/ 213 cm long. Cut into the following pieces :

– 12” or 30.5 cm – 1 pieces

– 24” or 61 cm – 3 pieces

Tools :

1. Chain nose pliers
2. Flush cutters for cutting the wire
3. 5 mm Dowel / Bail making pliers
4. 20 mm Dowel/ Mandrel/ anything cylindrical of this diameter

Stone :

Round Cabochon (stone with flat back): 18mm diameter

( I have used a Labradorite Cabochon in this project )

Beads :

• 3 mm bead: 1 Copper bead